How to disable seat belt alarm in Dodge Ram

Disabling the seat belt chime in your Dodge Ram is a very simple yet little tricky procedure, all you have to do is to follow the below steps.
● Sit in the vehicle and put your seat belt on and plugged in.
● Turn the ignition key into the run position.
● Now within 10 seconds unbuckle and buckle the seat belt thrice.
● Then Turn off the key and immediately you hear a chime, which means that the system is deactivated.
● Then turn on the engine and you will hear one ding after that only the seat belt light appears and no sound.

Now you can’t hear the continuous dinging chime but the seat belt light in the dash display is still blinking to remind you that seat belts are required.

The continuous sound of the seat belt chime is very irritating, but it is never recommended to drive the vehicle without seat belts and you cannot do this on the road because your safety should always be your priority.

Sometimes you are carrying some heavy stuff and you have no other space left except the seats, in that case, the sensors installed in the seats sense that weight is on the seats, and it activates the seat belt alarm.

Now you don’t have the clue how to stop this irritating noise even if you are following the rules by wearing your seat belt properly. Don’t worry, just follow the steps explained earlier and drive safely and quietly.

However, in a few cases when you are off-roading on your farm in slow motion for a longer path or you are driving in a drive-through of any restaurant and fed up with wearing a seat belt then you may also use this trick to disable seat belt chime.

Why do the cars have seat belt chimes?
Car manufacturers are always trying to install safety features in vehicles and inside the cabin of the car, seat belts are the most basic safety feature which we find in every vehicle.

But this safety feature is only effective when you wear the seat belt every time but suppose you are in a hurry and getting late to reach somewhere in a meeting and in the panic situation you even forgot to fasten your seat belt in this case the seat belt chime act as life-saving tool it reminds you by continuous dinging to wear your seat belt until you put your seat belts on.

Where did the idea of the seat belt chime come from?
There is a very interesting story lies behind the idea of the seat belt chime, in the year 1960 Mr. Wes Jayne who was a resident of New York experienced a funny situation, whenever he goes for a drive with his wife she start arguing and did not ready to fasten her seat belt, she tried every possible reason to avoid fasting seat belt.

To solve this problem Mr. Wes Jayne comes up with an idea due to which his wife is ready to fasten her seat belt as fast as she can.
He installed a switch under the front passenger seat and connect it with a doorbell buzzer which he hides behind the dashboard and he also installed a light lamp that turns on with a buzzer and shows the “safety belt” text in the place where the car clock was installed previously.

so this was the story behind this although Mr. Wes Jayne has the credit to invent this system. Here we are not sure that this trick convince the car manufacturers to start installing chimes because till the 1970s we did not see any such feature in American cars.

What is a seat belt chime stopper?
The trick mentioned above may not be workable in other vehicles. To solve this problem there is a small gadget called the seat chime stopper available on the market but again this is not advised to use this gadget while driving on the roads.
These seat belt chime stoppers are only being made to stop the chime in case you put any heavy item in the seat and the sensor detects the weight on the seat and the chime will activate automatically.

To solve this problem, you can use this hack to avoid seat belt sound. Here we need to mention an important point the chime stopper should never be used to quiet seat belt sounds without wearing a seat belt while driving.

How does the seat belt chime stopper work?
The seat belt chime stopper is a little clip that you have to put in the seat belt buckle and suddenly the noise disappears. The stopper clip acts as a belt clip and it fools the seat belt lock sensor that the belt is on and the system automatically closes the signal and noise.

Can seat belt chime be stopped without manipulating car wirings?
If you don’t want to hear the chime sound and you also don’t want to manipulate your car wiring panel or any other method to disable the noise.
There is a product called a seat belt alarm stopper this clip-like product is act like a seat belt buckle and it fools the belt lock system by completing the circuit and as a result, the chime stops immediately.

Why Do car manufacturers install audible seat belt warnings?
Since passenger safety is the utmost requirement present in every car manufacturer’s mind, they often came up with new ideas to save the vehicle passengers in any way they can.

Seat belt chime is also one of the features which serves as a very effective tool to remind people to fasten their seat belts.
In the early 2000s, the seat belt chime appeared in various vehicles and since then it became a regular feature in the majority of cars.

In the start, this function was limited to front seats only but afterward, this function was installed in back seats as well.
The primary function of this chime is to remind the passengers and drivers to fasten their seat belts for safety.

Conclusion
It is obvious that the use of a seat belt is mandatory all the time while you are driving and the seat belt light and dinging sound was made for our utmost safety.
But sometimes we need to shut this sound because the seat is not occupied by a passenger but we have put some heavy objects on it and the system recognizes this as a passenger and starts dinging the chime sound, to overcome this problem some cars have a hidden feature to disable the chimes the cars that don’t have this function there are seat belt stopper clips available in the market.

To end this please note that one should never drive the vehicle without fastening the seat belt and always educate others to fasten the belts for their safety as well.